• Skip to primary navigation
  • Skip to main content
  • Skip to footer

(320) 796-0851

Castair

Castair

  • Compressors
    • Industrial Air Compressors
    • Commercial and Garage Air Compressors
    • Contractor Air Compressors
    • Duplex Air Compressors
    • Gas Powered Air Compressors
    • Rotary – Piston Air Compressors
    • Rotary – Screw Air Compressors
    • Cube Air Compressor for Commercial and Industrial use
  • Major Components
    • Cast Iron Air Compressor Pumps
    • Electric Motors
    • Air Compressor Tanks
    • Pressure Switches
    • Magnetic Motor Starters
    • Check Valves
    • Safety Valves
    • Gauges
    • Air Compressor Oil
    • Air Filters
  • Air Drying Equipment
    • Air-Cooled Aftercoolers
    • Refrigerated Compressed Air Dryers
    • Regenerative Tower Dryers
    • Filters / Regulators / Lubricators
  • Accessories
    • Automatic Drains
    • Intake Noise Silencer
    • Noise Reduction Enclosures
    • Right From Start Kits/Motor Base Belt Tensioner
    • Vib Pads / Discharge Tubes / Elbows
    • Ball Valves / Flex Lines
    • Alternator / Hour Meter Time Delay
    • Pilot Valves
    • Throttle Controls / Gas Engines / Tank Manifolds
    • Motor Pulleys / Belt Guards / Belts
    • Dual Controls
  • Guides
    • Videos
    • Installation Diagram
    • Air Distribution Piping
    • Formulas / Air Tool Comsumption Guide
    • Duty Cycles / Wiring
    • Pump Breakdowns
    • Point of Purchase
    • SDS Sheets
  • About
    • Contact
    • News
    • Air Compressor Servicing

Gas Powered Air Compressors

HONDA GAS POWERED COMPRESSORS


COMPRESSOR + GENERATOR + WELDER

GENERATOR – 5500 Watts 
(surge 5000 Watts)

  • 2 X 115 Volt / 17 Amp Outlets 
  • 1 X 230 Volt / 23 Amp Outlet

WELDER – 240 Amp DC Arc 

  • Universal 55mm quick connects
  • Duty Cycle: 130A = 100%, 180A = 60%, 240A = 35% 
Gas Powered Honda Compressor, The Castair I13GH3HC1GW is a heavy-duty industrial series air compressor, engineered by Castair, a family-owned Minnesota company since 1991, for superior performance in demanding medium to large shop environments. Powered by a reliable 13 HP Honda GX390 gasoline engine with rope/electric start, this compressor delivers an impressive 30.3 CFM at 175 PSI, operating at a slow 635 RPM for quiet performance and extended durability. Its two-stage, full cast iron, oil-lubricated pump is designed for long-lasting operation, making it ideal for heavy-duty industrial air compressor tasks in construction, automotive repair, and manufacturing settings.
The 30-gallon horizontal ASME-certified, powder-coated tank ensures safety, corrosion resistance, and ample air storage for continuous use, perfect for powering high-demand pneumatic tools like impact wrenches, grinders, and sandblasters. Equipped with advanced intake noise silencers, featuring automotive-type filter/silencers with paper elements, the I13GH3HC1GW significantly reduces operational noise, providing a quieter workspace while maintaining clean air intake for optimal efficiency. The V-twin cylinder design offers 360-degree cooling for enhanced performance and longevity, supported by precision steel connecting rods, automotive-type rod insert bearings at the crankshaft, and needle bearings at the wrist pin for unmatched reliability.
Key features include tapered roller bearings at both ends of the crankshaft for superior support and reduced friction, stainless disc and spring valves for easy maintenance and up to 10 times the lifespan of competitor reed valves, and pistons with four rings for higher efficiency and minimal oil carry-over. The compressor’s slow RPM and larger bore/stroke design result in cooler, quieter operation, extending pump life in rugged environments. Rigid metal belt guards, copper discharge, and unloader tubes enhance durability and heat dissipation, while an easy-to-read oil sight glass simplifies maintenance. A centrifugal unloader ensures load-less startups, and four feet provide stability on uneven surfaces.
Measuring approximately 48" L x 24" W x 38" H and weighing around 495 lbs, the I13GH3HC1GW is built for stationary or portable industrial use where electricity is unavailable. Its Honda engine includes throttle control, a fuel tank, and a 12V alternator for added versatility. All Castair compressors are built to order, allowing customization for specific needs. heavy-duty industrial air compressor Honda engine, Castair I13GH3HC1GW 30-gallon gas-powered compressor, two-stage air compressor with intake noise silencer, ASME-certified horizontal tank air compressor Minnesota, quiet operation industrial compressor 30.3 CFM, Honda GX390 air compressor for construction, durable cast iron pump gas air compressor, Minnesota-manufactured air compressor for automotive repair, high-performance two-stage compressor 175 PSI, industrial air compressor for manufacturing and sandblasting.
I13GH3HC1GW

Gas Powered Honda Compressor,The Castair I20GH3HC2 is a heavy-duty industrial series air compressor, meticulously crafted by Castair, a family-owned Minnesota company since 1991, for exceptional performance in medium to large shop environments where electricity may be unavailable. Powered by a robust 20 HP Honda GX630 gasoline engine with electric start, throttle control, fuel tank, and 12V alternator, this compressor delivers an impressive 43.6 CFM at 175 PSI, operating at a slow 845 RPM for quiet performance and extended service life. Its two-stage, full cast iron, oil-lubricated pump ensures durability and reliability, making it ideal for heavy-duty industrial air compressor applications in construction, automotive repair, manufacturing, and truck-mounted operations like duct cleaning.
The 30-gallon horizontal ASME-certified, powder-coated tank provides ample air storage and is built for safety and corrosion resistance, perfect for powering high-demand pneumatic tools such as impact wrenches, sanders, grinders, and sandblasters. Equipped with advanced intake noise silencers, including automotive-type filter/silencers with paper elements, the I20GH3HC2 significantly reduces operational noise, ensuring a quieter workspace while maintaining clean air intake for optimal efficiency. The V-twin cylinder design promotes 360-degree cooling for enhanced performance and longevity, supported by precision steel connecting rods, automotive-type rod insert bearings at the crankshaft, and needle bearings at the wrist pin for superior reliability.
Key features include tapered roller bearings at both ends of the crankshaft for reduced friction and superior support, stainless disc and spring valves offering up to 10 times the lifespan of competitor reed valves for easy maintenance, and pistons with four rings for higher efficiency and minimal oil carry-over. The slow RPM and larger bore/stroke design result in cooler, quieter operation, extending pump life in rugged environments. Rigid metal belt guards, copper discharge, and unloader tubes enhance durability and heat dissipation, while an easy-to-read oil sight glass simplifies maintenance. A centrifugal unloader ensures load-less startups, and four feet provide stability on uneven surfaces.
Measuring approximately 48" L x 24" W x 38" H and weighing around 595 lbs, the I20GH3HC2 is designed for stationary or portable industrial use. All Castair compressors are built to order, allowing customization to meet specific requirements. For inquiries or to tailor features
I20GH3HC2

Gas Powered Honda Compressor, The Castair I13GH3HC2 is a heavy-duty industrial series air compressor, expertly crafted by Castair, a family-owned Minnesota company since 1991, for superior performance in medium to large shop environments where electrical power may be limited or unavailable. Powered by a robust 13 HP Honda GX390 gasoline engine with rope/electric start, throttle control, fuel tank, and 12V alternator, this compressor delivers 30.3 CFM at 175 PSI, operating at a slow 635 RPM for quiet performance and extended durability. Its two-stage, full cast iron, oil-lubricated pump ensures long-lasting reliability, making it ideal for heavy-duty industrial air compressor applications in construction, automotive repair, manufacturing, and mobile operations like tire service or farm maintenance.

The 30-gallon horizontal ASME-certified, powder-coated tank offers ample air storage and is built for safety and corrosion resistance, perfect for powering high-demand pneumatic tools such as impact wrenches, grinders, sanders, and sandblasters. Equipped with advanced intake noise silencers, featuring automotive-type filter/silencers with paper elements, the I13GH3HC2 significantly reduces operational noise, ensuring a quieter workspace while maintaining clean air intake for optimal efficiency. The V-twin cylinder design provides 360-degree cooling for enhanced performance and longevity, supported by precision steel connecting rods, automotive-type rod insert bearings at the crankshaft, and needle bearings at the wrist pin for superior reliability.

Key features include tapered roller bearings at both ends of the crankshaft for reduced friction and enhanced support, stainless disc and spring valves offering up to 10 times the lifespan of competitor reed valves for easy maintenance, and pistons with four rings for higher efficiency and minimal oil carry-over. The slow RPM and larger bore/stroke design result in cooler, quieter operation, extending pump life in rugged environments. Rigid metal belt guards, copper discharge, and unloader tubes improve durability and heat dissipation, while an easy-to-read oil sight glass simplifies maintenance. A centrifugal unloader ensures load-less startups, and four feet provide stability on uneven surfaces.

Measuring approximately 48" L x 24" W x 38" H and weighing around 495 lbs, the I13GH3HC2 is designed for stationary or portable industrial use. All Castair compressors are built to order, allowing customization to meet specific needs. For inquiries or to tailor features, contact Castair at 8894 47th St. NE, Spicer, MN 56288, or call. heavy-duty industrial air compressor 13 HP Honda, Castair I13GH3HC2 gas-powered compressor 30-gallon, two-stage air compressor with intake noise silencer Minnesota, ASME-certified horizontal tank air compressor for construction, quiet operation industrial compressor 30.3 CFM 175 PSI, Honda GX390 air compressor for automotive repair, durable cast iron pump gas air compressor for manufacturing, Minnesota-manufactured air compressor for mobile tire service, high-performance two-stage compressor for farm maintenance, industrial gas air compressor with rope/electric start.
I13GH3HC2
Gas Powered Honda Compressor,  The Castair I13GH3HC1 is a heavy-duty industrial series air compressor, expertly engineered by Castair, a family-owned Minnesota company since 1991, for outstanding performance in medium to large shop environments or remote job sites without electrical power. Powered by a dependable 13 HP Honda GX390 gasoline engine featuring rope/electric start, throttle control, fuel tank, and 12V alternator, this compressor delivers a robust 30.3 CFM at 175 PSI, operating at a slow 635 RPM for quiet performance and extended durability. Its two-stage, full cast iron, oil-lubricated pump ensures exceptional reliability, making it perfect for heavy-duty industrial air compressor applications in construction, automotive repair, manufacturing, agriculture, and mobile operations like pipeline maintenance or equipment repair.
The 30-gallon horizontal ASME-certified, powder-coated tank provides substantial air storage and is designed for safety and corrosion resistance, ideal for powering high-demand pneumatic tools such as impact wrenches, grinders, sanders, and sandblasters. Equipped with advanced intake noise silencers, including automotive-type filter/silencers with paper elements, the I13GH3HC1 significantly reduces operational noise, ensuring a quieter workspace while maintaining clean air intake for optimal efficiency. The V-twin cylinder design promotes 360-degree cooling for enhanced performance and longevity, supported by precision steel connecting rods, automotive-type rod insert bearings at the crankshaft, and needle bearings at the wrist pin for superior reliability.
Key features include tapered roller bearings at both ends of the crankshaft for reduced friction and enhanced support, stainless disc and spring valves offering up to 10 times the lifespan of competitor reed valves for easy maintenance, and pistons with four rings for higher efficiency and minimal oil carry-over. The slow RPM and larger bore/stroke design result in cooler, quieter operation, extending pump life in rugged environments. Rigid metal belt guards, copper discharge, and unloader tubes improve durability and heat dissipation, while an easy-to-read oil sight glass simplifies maintenance. A centrifugal unloader ensures load-less startups, and four feet provide stability on uneven surfaces.
Measuring approximately 48" L x 24" W x 38" H and weighing around 495 lbs, the I13GH3HC1 is built for stationary or portable industrial use. All Castair compressors are built to order, allowing customization to meet specific requirements. For inquiries or to tailor features, contact Castair at 8894 47th St. NE, Spicer, MN 56288
I13GH3HC1

GAS HONDA – 2 STAGE – W/THROTTLE CONTROL, FUEL TANK, & 12V ALTERNATOR

Honda Model Starter Type  Tank Gal./Type  Pump R.P.M  CFM @ 0-PSI  CFM@ 175 PSI  LxWxH  Wt. (lbs)  Unit Model 
GX390  Rope/elec.  30 Horiz.  995  35.0  28.1  43x22x42  550  I 13GH3HC1 
GX390  Rope/elec.  30 Horiz.  635  37.0  30.3  48x22x40  605  I 13GH3HC2 
GX630  Elec.  30 Horiz.  885  55 43.6  50x34x43  640  I 20GH3HC2 
GX390  Rope/elec.  30 Horiz.  808  24.7  19.7  48x23x42  650  I 13GH3HC1GW 

Honda Oil Drain Kits: Mounted

Part #  Description 
HON1010  GX100 – GX200 
HON1012 GX240 – GX390 
HON1420  GX630 – GX660 

Footer

Contact Us

8894 47th St. NE Spicer, MN 56288

Phone: (320) 796-0851
Fax: (320) 796-0854
Email: [email protected]
Hours: 8:00-5:00pm Monday - Friday
Closed Monday, May 26th
Distributor Login

Copyright © 2025 Castair · All Rights Reserved · All photos are owned by Castair. · Sitemap · Privacy Policy · Developed by Vivid Image